Creep Duration Testing Machine
Testing Machine Class: Class 1 or Class 0.5
Force Relative Error: ±0.5%
Test Force Resolution: 1/500,000 of the maximum test force
Displacement Resolution: 0.001mm
1～500kN, customizable
The high and low temperature creep and endurance testing machine is a device focused on testing the long-term mechanical properties of materials. By precisely controlling a wide temperature range of -195℃ to 1600℃ and a constant load, it captures the creep deformation and endurance fracture patterns of materials in high and low temperature environments in real time. It provides data support for the reliability assessment of materials that need to withstand temperature fluctuations and is widely used in R&D and quality testing in industries such as automotive, aerospace, electronics, and new materials.
Product Overview
Applicable materials: High and low temperature resistant alloys (nickel-based alloy Inconel 718, titanium alloy TC4), low temperature steel (16MnDR), heat-resistant steel (12Cr1MoV), aluminum alloy (6061-T6), stainless steel (304/316L), etc.
Non-metallic materials: Engineering plastics (PA66, PPS), vulcanized rubber (silicone rubber, nitrile rubber), composite materials (glass fiber/epoxy resin, carbon fiber composite materials), ceramics (alumina ceramics), photovoltaic backsheet materials, battery separators, etc.
Compatible products:Automotive gearbox gears (low temperature resistant), aircraft cabin structural components (alternating high and low temperatures), electronic chip packaging materials (high and low temperature cycling), refrigerator compressor parts (low temperature), boiler pipes (high temperature), photovoltaic module frames (resistant to high and low temperature aging), new energy vehicle battery casings (high and low temperature tolerance), etc.
Features
Wide Temperature Control: Temperature range -195℃~1600℃, cascade cooling in the low-temperature zone and resistance heating in the high-temperature zone, heat spreader length 80-200mm, temperature control accuracy ±1℃ (high-temperature zone) / ±2℃ (low-temperature zone).
Stable Load: Maximum test force 1-500kN, axial tensile loading, load accuracy ±0.5% FS, equipped with a sealed loading structure adapted to high and low temperatures to avoid the influence of temperature on load output.
Full-Scenario Testing: Automatically detects creep rate, creep life, and elongation at break of metals/non-metals, supports high and low temperature cyclic creep testing, data acquisition interval adjustable from 0.1s to 1h, supports breakpoint continuation testing.
Convenient Operation: Chinese touch interface, real-time display of temperature-load-deformation curves, automatic generation of metal/non-metal dedicated test reports, supports Excel/PDF. Data export is compatible with laboratory management systems.
Reliable and durable: Anti-condensation design in the low-temperature zone, multi-layer insulation material for the high-temperature furnace body, high and low temperature compensation functions for sensors, continuous operation failure rate ≤0.5%, suitable for long-term stable testing.
Specifications
| Model | RDW-5-1 | RDW-20 | RDW-30 | RDW-50 | RDW-100 | RDW-30 | RDW-50 |
|---|---|---|---|---|---|---|---|
| Maximum test force | 5/10kN | 20kN | 30kN | 50kN | 100kN | 300kN | 500kN |
| Force measurement range | 0.4% ~ 100%FS (full scale) | ||||||
| Test force indication accuracy | Better than ±1% of the indicated value (precision level can reach ±0.5%) | ||||||
| Force resolution | ±500000 codes, no binning in the whole process, same resolution | ||||||
| Deformation accuracy | ±0.5% | ||||||
| Deformation measurement | 0 ~ 10 mm | ||||||
| Deformation resolution | ±500000 codes, no binning in the whole process, same resolution | ||||||
| Pulling stroke | 200mm | ||||||
| Pulling speed | 0.01 ~ 50mm/min | ||||||
| Host dimensions (mm) | 710×540×2200 | 730×540×2400 | 950×740×3200 | ||||
| Host weight | 400kg | 500kg | 600kg | 1000kg | 1200kg | ||
| Temperature range | -195 ~ 1600°C | ||||||
| Temperature fluctuation | 3°C | ||||||
| Temperature gradient | ±2°C | ||||||
| Inner furnace size | Φ80×340mm (customizable) | ||||||
| Outer furnace size | Φ320×8440mm (customizable) | ||||||
| Heating power | 1600°C | ||||||
| Furnace height | 150mm | ||||||
Company Profile
Are you looking for a loyal partner with experience in testing machines?
Need a quote for your next project? Contact us now and we will not let you down, Make sure your time is not wasted.
WTS will be your loyal partner and best choice, We have more than 10 years of experience in manufacturing high-quality testing machines for various industries. We warmly welcome you to purchase various universal testing machines from our factory.
